01 / Laser & Light
Aesthetic Laser & Light
CO₂ fractional and picosecond laser platforms.
2 modelsView category →
01 / Manufacturing partner for aesthetic professionals
Factory-direct aesthetic devices — OEM from 1 unit
We supply distributors and importers, clinics and dermatology practices, medi-spa and salon chains, private-label brands, nail salons, and postnatal recovery centres.
02 / PRODUCT RANGE
Product categories
Open a category to see every model
02 / Microneedling
Microneedling & Infusion
Vertical and desktop RF microneedling platforms, plus microneedling pens.
6 modelsView category →
03 / Hydration & Oxygen
Skin Hydration & Oxygen
Oxygen jet and hydra-oxygen devices, with or without a full-face LED mask.
2 modelsView category →
04 / Body Shaping
Body Shaping & Lipolysis
Fibre-coupled laser platforms for body contouring and vascular appearance.
1 modelView category →
05 / Recovery
Recovery & Wellness
Magnetic stimulation chairs for pelvic floor programmes.
2 modelsView category →
06 / Nail Printers
Nail Printers
Desktop and mobile printers, with cartridge, gel and mask consumables.
3 modelsView category →
Aesthetic Laser & Light · Microneedling & Infusion · Skin Hydration & Oxygen · Body Shaping & Lipolysis · Recovery & Wellness · Nail Printers
5,000M²
Factory floor
300+
Product models
40+
Export countries
1UNIT
Minimum order
24/7SERVICE
After-Sales Support
Lifetime Maintenance
Lifetime Maintenance
Manufacturing in Baiyun, Guangzhou — OEM from a single unit.
03 / WHO WE ARE
A factory that exports, not a trader that resells.
Est. 2022 · Baiyun, Guangzhou
VORLINA is the professional beauty technology brand of Hipdeer Technology Limited — a manufacturer and exporter headquartered in Hong Kong with our production facility in Baiyun District, Guangzhou, China.
Our 5,000 m² factory runs four production lines with six in-house engineers, supplying aesthetic laser and light systems, microneedling and infusion devices, skin hydration equipment, body shaping systems, recovery devices and professional nail printers. We export to more than 40 countries, with Europe, the United States and Africa as our main markets.
Every unit is assembled and inspected in our own facility. We operate a multi-stage quality control process, and before dispatch we record test videos and packing photographs for each order — so you can verify exactly what is being shipped before it leaves us.
Where applicable, our products are tested to European electrical safety (LVD) and electromagnetic compatibility (EMC) standards. Certification details are listed on our Certifications page.
Our order terms are simple: one unit minimum, samples in three to five working days, and full OEM/ODM support — logo, colour, packaging and formulation — from prototype through production.
04 / WHY BUYERS CHOOSE US
Six things that decide a first order.
Factory-direct terms
01
Factory-direct, not brokered
Own facility in Guangzhou with four production lines. You deal with the plant that assembles your order.
02
Real packing data published
Actual carton dimensions and gross weight on every product page — so you can price freight before you ask.
03
Verified before dispatch
A test video and packing photographs for your specific order, sent for approval before the goods leave.
04
One unit to start
Minimum order of a single unit and a 3–5 working day lead time. Test the market before committing capital.
05
OEM/ODM from prototype
Logo printing, colour matching, packaging and formulation. ODM development typically 1–2 months.
06
Documentation you can use
Technical specifications, packing lists and MSDS packs for your freight forwarder and customs broker.
05 / TESTING & COMPLIANCE
What is tested, and under which directive.
16 documents · published in full
Our products are tested against applicable European directives — electromagnetic compatibility, and electrical safety for low-voltage equipment. The documents we hold for each series are published in full on our Certifications page.
EMC test reports
Electromagnetic compatibility. RF Microneedling · Nail Printer · Pelvic Floor · Picosecond Laser series.
Published in full · See the documents
LVD test reports
Electrical safety of low-voltage equipment. Nail Printer · Pelvic Floor · Picosecond Laser series.
Published in full · See the documents
Certificates of conformity
Issued against the named directives and standards, and naming the model they cover.
Published in full · See the documents
MSDS packs
Consumables — ink cartridges, printing gels and nail gels, for freight and customs.
Published in full · See the documents
06 / CATALOGUE
Product catalogue — EMS & Laser series
36-page catalogue covering our EMS body shaping and laser series, with technical data, configurations and consumable lists. Email it to your own buyers if it helps.
07 / INSIDE THE PLANT
Warehouse, showroom, and the loading bay.
Photographed on site
08 / TRADE FAIRS
Where we meet buyers.
Booth design concepts for the international fairs on our calendar.
09 / SOCIAL
Facebook
Daily behind-the-scenes updates from our factory — new units coming off the line, packing days and shipping photos.
10 / BUYER FEEDBACK
What buyers write back.
Unedited message exports
Click any message to enlarge
Message exports shown with buyer consent. Model names in the marketplace screenshot are the listing names used on that platform at the time.
11 / INSIGHTS
Buyers' guide to buying equipment.
Selected notes from the factory floor · All notes →
NOTE 01
What we check before your order leaves the factory
Multi-stage QC, a powered test run, a test video and packing photographs — sent to you for approval before dispatch. Here is the sequence your order goes through.
Read the note →
NOTE 02
Choosing needle depth: a practical reference
Two device families, two depth ranges — 0.5–7 mm on RF platforms with 12P / 24P / 40P probes, and 0.2–2.5 mm on microneedling pens. What the probe formats mean and how consumables are handled.
Read the note →
NOTE 03
EMC and LVD testing: what EU buyers should ask for
Two directives, two different risks. What a test report is, what a third-party certificate is, and why the letters CE on their own tells you nothing either.
Read the note →
12 / OEM & ODM
Eight steps from enquiry to shipment.
Applies to every order
STEP 01
Enquiry
You send models, volumes and market.
STEP 02
Quote & sample plan
Ex-works pricing and a sample schedule.
STEP 03
Sample build
3–5 working days for stock configurations.
STEP 04
Sample approval
You test it; revisions go back to step 03.
STEP 05
Branding artwork
Logo, colour and packaging artwork signed off.
STEP 06
Mass production
Built on our own lines, multi-stage QC.
STEP 07
Pre-shipment check
Test video + packing photos sent to you.
STEP 08
Shipment
Carton, flight case or wooden case. Docs supplied.
13 / FAQ
The questions buyers ask first.
Payment · samples · inspection · shipping
What is your minimum order quantity?+
One unit. We supply single units as samples and scale to container volumes. OEM orders also start from one unit.
How long do samples take?+
Lead time is 3–5 working days for stock configurations. Bulk orders are scheduled separately — send us your model and quantity and we will confirm a production date.
Do you publish real packing dimensions and gross weight?+
Yes. Every product page lists the actual carton dimensions and gross weight so you can calculate freight before you enquire. Multi-pack items such as the pelvic floor chair and main unit are listed as separate cartons.
What happens before shipment?+
Every unit is assembled and inspected in our own facility. Before dispatch we record a test video and packing photographs for your order and send them to you for approval.
What warranty do you provide?+
The main unit carries a 1-year warranty, on every model we supply. If you need the warranty terms in writing for a specific model, or details on consumables and spare parts, ask us and we will confirm them together with your quotation.
Can you match a specific colour?+
Yes. Send a Pantone or RAL reference, or a physical swatch, and we will produce a matching sample for your approval before mass production. Screen colour alone is not a reliable reference.
Can you print our logo and packaging?+
Yes. Logo processes include stickers and screen printing. Packaging options include carton, flight case and wooden case. ODM development typically takes 1–2 months.
Can we visit the factory?+
Yes, and we will arrange airport pickup for your visit. Our facility is in Baiyun District, Guangzhou. Tell us your travel dates and we will plan the schedule around your itinerary.
What about certification?+
Where applicable our products are tested to European electrical safety (LVD) and electromagnetic compatibility (EMC) standards. We are re-issuing our certificates under our own company name; certificate details will be published on our Certifications page. Buyers should confirm the regulatory pathway that applies in their own market.
What are your payment terms?+
Terms are confirmed per order and per market. Send your requirement through the enquiry list and our team will come back with pricing and terms.
REQUEST A QUOTATION
Send us the models you are pricing.
Add models to your enquiry list and submit them together — one form, one reply, covering every unit you are considering.